Nyomot Info

I use two hard disk drives in my computer. Drives that I use as a second drive is the drive thats my friend can not be used as a master. At the boot with this drive, the boot process stalled or stagnated after the memory check at the beginning of booting, even in the BIOS, hard drive properly recognized. When I did Scandisk, the drives have bad sectors is approximately 130 kb at the end of the drive. Although bad sector has been fixed, it still can not boot. But this drive can still be read when used as slave. Although the drive can be used to read or write data, but often stops at boot time with a beep sounds and displays the following text: "one or more of your disk drives may have developed bad sectors. Press any key to run ScanDisk with surface analysis on these drives." Then if I press any key, the ScanDisk will check the second drive. After that, the computer can run normally, dont know if ScanDisk has fixed this bad sector or not. Actually, whats going on? Answer: Most...

Can we repair bad sectors on a harddrive using Norton Utility? If I used HDD Regenerator, how much is the percentage of my harddisk can be repaired? For your information, the hard drive I used is a Parallel ATA harddisk with capacity of 20GB. Answer: I do not think it can do the job. Its better for you to try with hard disk maintenance programs that are made by hard drive manufacturers itself. But if you want to try with Norton Utilities , go ahead. Use Norton Disk Doctor feature. Or you can try Norton SystemWorks. It has more features. Ive tried on several hard disk, bad sector it could lose 100 percent, but after 2 months, its troubled again.